 |
EN
｜
繁體中文
PE TUBING
Production information
Polyethylene has long been recognized as an engineering plastic that exhibits a high degree of inertness. This makes it attractive for use in markets such as food and beverage, laboratories, and chemical processing where teaching or permeability would prevent risks. Polyethylene is also of the lower-cost plastic materials and satisfies many requirements that call for inexpensive, lightweight tubing. It handles a wide variety of applications ranging from potable water feed or drain lines to pneumatic or signal lines used in instrumentation.
// Features
// Material
Low Density Polypropylene, High Density Polypropylene (FDA approved)
// Applications
// Temperature Range
-40°C to 80°C
// Working Pressure
3 to 1 safety factor
// Color
Natural(N)/Black(BK) /BLUE(BU) /RED(R) /YELLOW(Y)
// Metric size type
// Inch size type
// Features
- Lightweight, Flexible and Long Lasting
- High Dielectric Strength
- Excellent Chemical Resistance
- The Lowest Cost
- Dimensional Stability
- FDA Approved
// Material
Low Density Polypropylene, High Density Polypropylene (FDA approved)
// Applications
- Tubing for pneumatic equipment
- Tubing for fluid elements
- High moisture content environments
// Temperature Range
-40°C to 80°C
// Working Pressure
3 to 1 safety factor
// Color
Natural(N)/Black(BK) /BLUE(BU) /RED(R) /YELLOW(Y)
// Metric size type
| TYPE | O.D.* I.D. (mm) | BREAK PRESSURE (Kgf/cm²) |
WORKING PRESSURE (Kgf/cm²) |
WEIGHT (g/m) |
| PE0402 | 4X2 | 30 | 10 | 9 |
| PE0425 | 4X2.5 | 27 | 9 | 7 |
| PE0604 | 6X4 | 30 | 10 | 15 |
| PE0806 | 8X6 | 30 | 10 | 20 |
| PE1075 | 10X7.5 | 30 | 10 | 33 |
| PE1209 | 12X9 | 27 | 9 | 47 |
// Inch size type
| TYPE | O.D.* I.D. (mm) | BREAK PRESSURE (PSI) |
WORKING PRESSURE (PSI) |
WEIGHT (g/m) |
| PE 1/8 | 3.2X2 | 450 | 150 | 5 |
| PE 3/16 | 4.76X3.2 | 420 | 140 | 11 |
| PE 1/4 | 6.35X4.57 | 420 | 140 | 25 |
| PE 3/8 | 9.5X7 | 420 | 140 | 32 |
| PE-1/2 | 12.7X9.5 | 420 | 140 | 52 |